Iluminarc Ilumiline 36 IP Optic RGB Quick Reference Manual page 6

Ilumiline 36 IP Optic RGB QRG
DMX
Connection
Signal Wiring
DMX Junction Box
Wiring
DMX Cable Table
You can connect the bare-ended IP66 rated signal cable from the product to
two IP66 rated signal connectors (DMX in and DMX Out) or use an IP66
rated junction box. If using an IP66 rated junction box, make sure to use
IP66 rated conduit.
To provide a signal for this product, you can connect the bare-ended IP66
rated signal cable from the product to two IP66 rated signal connectors
(DMX in and DMX out) or use an IP66 rated junction box. In this case,
make sure to use IP66 rates conduit.
The signal cable must match or exceed the electrical characteristics of
the Belden 9841 cable for EIA RS-485 applications. You can also use
CAT 5, CAT 5e, or CAT 6.
Connection
Ground
Data -
Data +
DMX In DMX Out
Shield
Black
White
6
IP66 Pin
Shield
Green
Red
1
2
3