Installing The Software - Medion LIFE X44022 Instruction Manual

15. Installing the software

There is a picture editing program called "CyberLink PhotoDirector" on the CD supplied
with the product.
How to install the CyberLink PhotoDirector:
 Insert the installation CD in the DVD/CD drive.
 The CD is automatically executed and a selection screen appears.
 Select the entry "Install CyberLink PhotoDirector" on the selection screen.
 Follow the instructions to complete the installation.
 Start the program via the symbol on the desktop, where applicable.
 When you start the program for the first time, it has to be activated.
To activate the program, enter the serial number
HEZGA-B5DS5-3P3SS-GS648-HLJS6-UNP3E.
NOTE!
Help with using the program is available in the help system software, which
can be accessed by pressing the H3 button.
If the CD is not automatically executed, follow the steps below to install the software:
 Double-click on desktop.
 Move the cursor to the DVD/CD drive.
 Right-click, then click on Open.
 Double-click on Setup.exe.
 A wizard will then guide you through the installation process.
 Follow the instructions to complete the installation.
 Start the program via the symbol on the desktop.
 When you start the program for the first time, it has to be activated.
To activate the program, enter the serial number
HEZGA-B5DS5-3P3SS-GS648-HLJS6-UNP3E.
DE
EN
NL
FR
211 of 434