Samsung PN4B40PD User Manual page 24

Temporary image retention may occur when viewing a static image on the set for more than two hours.
N
After selecting Zoom1, Zoom or Wide Fit:
N
Press the ◄ or ► button to select Position, then press the ENTER
Press the ▲ or ▼ button to move the picture up and down.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
You can initialize the setting.
After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you made need to center the picture:
N
Press the ◄ or ► button to select Position, then press the ENTER
Press the ▲, ▼, ◄ or ►button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
N
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
ATV, Video, Component (480i, 480p)
Component (720p)
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)
Digital NR

If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
• Off: Turns the Digital NR function off.
• Low: Sets Digital NR to low.
• Medium: Sets Digital NR to medium.
• High: Sets Digital NR to high.
• Auto: Sets Digital NR to Auto.
HDMI Black Level

You can directly select the black level on the screen to adjust the screen depth.
• Normal: The screen gets brighter.
• Low: The screen gets darker.
This function is active only when an external device is connected to the TV via HDMI.
N
HDMI Black Level function may not be compatible with all external devices.
Film Mode

The TV can be set to automatically sense and process film signals from all sources and
adjust the picture for optimum quality.
• Off: Basic video image processing applied and No auto-detection for
film-based programs.
• Auto: Automatically adjusts for the best image quality between film and
video programs.
Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).
N
Screen Burn Protection

Configures the Screen Burn Protection options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
Preventing Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you
to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture in minutes.
• Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after-
images on the screen.
Optimum condition for pixel shift;
N
Horizontal
Vertical
Time(min.)
Item TV/AV/Component/HDMI
0~4
0~4
1~4 min.
English - 4
button.
E
button.
E
button.
E
button. The TV will be reset to 16:9.
E
Picture Size
1:, Zoom1, Zoom, 4:
1:, Wide Fit, 4:
1:, 4:, Wide Fit, Screen Fit
Color Tone
Size
Digital NR
HDMI Black Level
Film Mode
Screen Burn Protection
2
2
2 min.
Tint (G/R) : G50/R50
Advanced Settings
Picture Options
►
Picture Reset
Picture Options
: Normal
: 16:9
: Auto ►
: Normal
: Off
Move Enter Return
Continued...