Connecting A Digital Audio System; Connecting An Amplifier / Dvd Home Theater - Samsung PN50A550S1F Manual

Connecting a Digital Audio System

Digital Audio System

Optical Cable (Not supplied)
➢ 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
➢ Each Digital Audio System has a different back panel configuration.
➢ When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying
a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you
want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box
directly to an Amplifier or Home Theater, not the TV.

Connecting an Amplifier / DVD Home Theater

Amplifier / DVD Home Theater
Audio Cable (Not supplied)
TV Rear Panel
TV Rear Panel

English - 6
1
Connect an Optical Cable
between the DIGITAL AUDIO OUT
(OPTICAL) jacks on the TV and
the Digital Audio Input (OPTICAL)
jacks on the Digital Audio System.
When a Digital Audio System is
connected to the "DIGITAL AUDIO
OUT (OPTICAL)" jack:
Decrease the volume of the TV,
and adjust the volume level with the
system's volume control.
➢ OPTICAL: converts the electric
signal into an optical light signal, and
transmits it through glass fibers.
1
Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD Home
Theater. When an audio amplifier
is connected to the AUDIO OUT
[R-AUDIO-L] jacks terminals :
Decrease the volume of the TV,
and adjust the volume level with the
Amplifier's volume control.
➢ Each Amplifier / DVD Home
Theater has a different back panel
configuration.
➢
When connecting an Amplifier / DVD
Home Theater, match the color of the
connection terminal to the cable.