Connecting A Digital Audio System - Samsung PN50A650TF Quick Setup Manual

Connecting a Digital Audio System

Digital Audio System
➢ 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
➢ Each Digital Audio System has a different back panel configuration.
➢ When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a
DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such
as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box
directly to an Amplifier or Home Theater, not the TV.
Connecting an Analog Amplifier / DVD Home Theater
TV Rear Panel

TV Rear Panel
Optical Cable (Not supplied)
DVD Home Theater
Audio Cable (Not supplied)
English - 6



Amplifier/
➢ Each Amplifier / DVD Home
➢ When connecting an Amplifier / DVD
Connect an Optical Cable
between the DIGITAL AUDIO OUT
(OPTICAL) jack on the TV and the
Digital Audio Input (OPTICAL) jacks
on the Digital Audio System.
When a Digital Audio System is
connected to the "DIGITAL AUDIO
OUT (OPTICAL)" jack: Decrease
the volume of the TV, and adjust
the volume level with the system's
volume control.
What is OPTICAL?
• An optical cable converts an
electric signal into an optical
light signal, and transmits it
through glass fibers. S/PDIF is
a transmission system of digital
audio in the form of a light wave
that uses a glass conductor.
Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the "AUDIO OUT
[R-AUDIO-L]" jacks terminals:
Decrease the volume of the TV,
and adjust the volume level with the
Amplifier's volume control.
Theater has a different back panel
configuration.
Home Theater, match the color of the
connection terminal to the cable.