Picture Control; Changing The Picture Standard; Customizing The Picture Settings - Samsung PN50A550S1F Manual

4
When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ▲, ▼, ◄, ► to select the correct analog
signal cable system source among STD, HRC, and
IRC, then press the ENTER button. If you have
Digital cable TV, select the cable system signal
source for both Analog and Digital.
➢ STD, HRC, and IRC identify various types of
cable TV systems. Contact your local cable
company to identify the type of cable system
that exists in your particular area. At this point
the signal source has been selected.
Auto Program
Select the cable system.
Analog STD
Digital
STD
Move
5
The TV begins memorizing all available stations.
If you want to stop Auto Programming, press the
ENTER button.
The Stop Auto Program? message will be
displayed. Select Yes by pressing the ◄ or ►
button, then press the ENTER button.
Auto Program
Stop Auto Program?
Yes
Move
● The TV must be connected to an antenna/cable
in order to receive digital TV signals. Even if a
particular channel is deleted from the memory,
you can always tune to that channel directly by
using the number buttons on the remote control.
Viewing All Channels
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2
Press the ▲ or ▼ button to select Channel List,
then press the ENTER button.
Press the ◄ button to select Added Channels.
3
Press the ▲ or ▼ button to select All Channels,
then press the ENTER button. Shows all currently
available channels. Press the ▲ or ▼ button to
select a channel to view, then press the ENTER
button.
6-1 ♥ SBS
7 Air
7-1 ♥ KBS D-2
9 Air
9-1 ♥ KBS D-1
10 Air
10-1 ♥ EBS DTV
11-1 ♥ MBC DTV
19 Air
22 Air
Air ■ Antenna ■ Zoom ■
HRC IRC
HRC IRC
Enter Return
Air 10
3%
No
Enter Return
Select Option ► Next Program
TOOLS
English - 

Picture Control

You can select the type of picture which best corresponds to your
viewing requirements.

Changing the Picture Standard

1
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select Dynamic,
Standard, or Movie, then press the ENTER button.
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Detailed Settings
Picture Mode
• Dynamic: Select the picture for high-definition in a
bright room.
• Standard: Select the picture for the optimum display
in the normal environment.
• Movie: Select the picture for viewing movies in a
dark room.

Customizing the Picture Settings

1
To select the desired picture mode, follow the
"Changing the Picture Standard" instructions number
1.
2
Press the ▲ or ▼ button to select Cell Light,
Contrast, Brightness, Sharpness, Color, or Tint
(G/R), then press the ENTER button.
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Detailed Settings
Picture Options
:
Dynamic
Standard
: 7
Movie
: 80
: 45
: 50
: 50
: G50/R50
: Standard
: 7 ►
: 95
: 45
: 50
: 50
: G50/R50
Continued...