Remote Control Buttons You can use the remote control up to a distance of about 23 feet from the TV. POWER Turns the TV on and off. Selects the TV mode directly. 3 NUMERIC BUTTONS Press to directly select a channel.
HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD Player or Cable Box / Satellite receiver to confirm the HDMI version, then request an upgrade.
Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. ➢ When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.
Antenna Cable (Not supplied) ➢ If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
➢ When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s sub-menu. Press the EXIT button to exit.
DTV Cable : -- Cable : -- Stop Enter Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard Press the MENU button to display the menu. Press the ENTER button to select Picture.
To Select the Source Press the MENU button. Press the ▲ or ▼ button to select Input, then press the ENTER button. Source List Edit Name Press the ENTER button again to select Source List. Press the ▲ or ▼ button to select a signal source, then press the ENTER button.
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Poor picture quality. Poor sound quality. No picture or sound.
Page 12
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center CANADA 1-800-SAMSUNG (7267864) U.S.A 1-800-SAMSUNG (7267864) Web Site Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada www.samsung.com/ca...