Advertisement
Do not use this unit with any
pre-heated water feed if the light has
illuminated steadily, having performed
the above test.
The unit in this state must
only be fed with cold water.
For "Non-Thermostatic" modules only
If the indicator light on the printed circuit board illuminates with the water flowing and there is no
heating of the water, it is highly likely that the heating element has been damaged. If the above
situation occurs, contact Technical Service for replacement elements.
IF HAVING CARRIED OUT ALL THE TESTS LISTED ABOVE AND THE WATER
HEATING UNIT IS STILL NOT FUNCTIONING, PLEASE CONTACT TECHNICAL
SERVICE AT 1-800-334-3393.
PLEASE HAVE THE FOLLOWING INFORMATION AVAILABLE:
1) ORDER REF. NUMBER (Located on U.L. rating label on the front cover of
unit).
2) SERIAL NUMBER (Inside unit on back plate).
WARNING
3rd wire from left
6
Advertisement
