End Of Life Information - Grant Solo Compact Installation And User Instructions Manual

12 EnD OF LiFE inFORmatiOn

GEnERaL
Grant Solo fan convectors incorporate components manufactured from a variety of different materials.
The majority of these materials can be recycled whilst the smaller remainder cannot.
Materials that cannot be recycled must be disposed of according to local regulations using appropriate waste collection and/or disposal
services.
DisassEmbLY
There is little risk to those involved in the disassembly of this product. Please refer to and follow the Health and Safety Information given
in these instructions.
For guidance on the disassembly of the fan convector refer to the information given in the Servicing section of these instructions.
RECYCLinG
Many of the materials used in Grant fan convectors can be recycled, these are listed in the table below:
COmPOnEnt
Chassis and casing
Heat exchanger
Front casing panel (wall hung units)
Connection pipework
Foam insulation
Electrical wiring
Printed Circuit boards
Transformer
Fans
DisPOsaL
All materials other than those listed above must be disposed of responsibly as general waste.
Neil Sawers
Technical Manager
section 12: End of Life information
matERiaL
Mild steel (galvanised)
Copper tubes, Aluminium fins
Polycarbonate
Copper
Semi closed cell polyester
Copper/plastic
Copper/plastic
WEEE electrical recycling (Disassemble)
Page 17