Vantage Point Products AX2WL01 Assembly Instructions

� � ���� ��� � ���� ��� � ����

Mounting

��� � ����
� � ���� ��� � ����
Spacer
Mounting
Flat Panel
Screw
��� � ����
� � ���� ��� � ����
Screwdriver
100mm x 100mm
Vesa Only
��� � ����
��� � ����
Mounting
Spacer
Mounting
Flat Panel
Screw
Screwdriver
Do not overtighten!
!
5
��� � ����
��� � ����
��� � ����
6
��� � ���� ��� � ����
��� � ����
��� � ����
��� � ����
��� � ����
��� � ����
!
7
8
Model AX2WL01 100/200mm VESA
Flat Panel Mount Assembly Instructions
NOTE! Hardware has been included for Wood Stud and Solid Concrete Wall Construction. Hardware is not intended for
use on Metal Stud, Hollow Wall and Cinder Block Wall installation. Preview all steps before beginning. Should any portion of
these instructions be unclear, contact us directly at 800-582-9595 for assistance. Do not attempt to assemble this Vantage Point
100/200mm Flat Panel Mount, if you have any doubts as to its proper assembly and installation.
mum weight indicated. Use with heavier than the maximum weight indicated may result in instability causing possible injury. Use
of this product for any other purpose unless specified by Vantage Point Products is not recommended. Think
B
��� � ���� ��� � ����
A
��� � ����
��� � ����
��� � ����
��� � ����
Hook !
Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USA
USA Tel: 1.800.582.9595 • Canada Tel: 905.607.9994 • Europe Tel: 31.72.581.6056
PART
A
B
C
F
D
C
H
E
N
G
F
G
H
I
J
K
L
M
E
N
D
K
M
L
J
N
I
All Vantage Point Products Corp. products are manufactured to ensure
superior quality, performance and durability for a lifetime of use . War-
ranty covers the product to be free of defects in materials and work-
manship under normal and reasonable use. Vantage Point Products
will repair or replace, at our option, any product which proves to be
defective upon our inspection. This warranty will not apply to products
that have been lost or damaged by misuse, abuse or accident, altered
or repaired in any way or by any person or firm other than specified by
us, used in violation of instructions or incorrect assembly nor used in
a manner other than specified by us. This warranty is nontransferable
to a new owner and may require proof of purchase. All claims must
��� � ������� be directly handled with Vantage Point Products Corp. by calling us at
Optional Double Stud Plate
NOT INCLUDED
Web Site: www.vanptc.com • Email: cons-serv@vanptc.com
CAUTION - Do not exceed maxi-
Safety First!
DESCRIPTION QTY
3/8" dia. wall anchor 4
(concrete only)
5º wedge block 1
(use for tilt only)
200mm LCD wall mount plate 1
#14 x 2" phillips sheet metal screw 4
#14 x 3" phillips sheet metal screw 2
(5º wedge only)
4mm x 20mm phillips machine screw 4
4mm x 30mm phillips machine screw 4
LCD mounting spacer 4mm i.d. 4
5mm x 20mm phillips machine screw (gold) 4
5mm x 30mm phillips machine screw (gold) 4
6mm x 20mm phillips machine screw 4
6mm x 30mm phillips machine screw 4
LCD mounting spacer 5mm-6mm i.d. 4
LCD stand off spacer 10mm thick 4

Maximum Flat Panel Weight:

100 lbs / 45.5 kgs

WARRANTY INFORMATION

1-800-582-9595.
6i83-05/05