Hyundai IONIQ Hybrid 2017 Quick Reference Manual page 9

Hide thumbs Also See for IONIQ Hybrid 2017:
Table of Contents

Advertisement

FEATURES AND CONTROLS
HOMELINK WIRELESS CONTROL SYSTEM
Standard Programming
To train most devices, follow these instructions:
1. For the first-time programming, press and hold the two outside
®
buttons, HomeLink
Channel 1 and Channel 3 buttons, until the
indicator light begins to flash (after 10 seconds). Release both
buttons. Do not hold the buttons for over 20 seconds.
2. Position the end of your hand-held transmitter 1-3in. (2-8cm)
®
away from the HomeLink
buttons while keeping the indicator
light in view.
3. Simultaneously press and hold both the HomeLink
hand-held transmitter button. DO NOT release the buttons until
step 4 has been completed.
4. While continuing to hold the buttons, the red indicator Status LED
will flash slowly and then rapidly after HomeLink
trains to the frequency signal from the hand-held transmitter.
Release both buttons.
For more detailed information, please refer to your Owner's Manual, or
visit
www.homelink.com
or call (800) 355-3515.
14
I Quick Reference Guide
WIRELESS CELLULAR PHONE CHARGING SYSTEM
NOTE:
charger. Avoid placing credit cards on the charger as they may be
damaged by the magnetic field.
The charging area may be warm while using wireless charging.
SEAT WARMER (Front seat)
®
and the
®
successfully
HYUNDAI
IONIQ HYBRID
There is a wireless cellular phone
charging system inside the front
console. The system operates with
all doors closed, and the Engine
Start/Stop button in the ACC/ON/
START position.
NOTE:
The wireless cellular phone charging
system supports only the Qi-enabled
cellular phones ( ).
Do not place any metallic items such as coins, keys on the
Each time you push the button,
the setting is changed as follows:
OFF
HIGH
If you want to turn it off immediately,
press and hold the button.
MIDDLE
LOW
Quick Reference Guide I
15

Advertisement

Table of Contents
loading

Table of Contents