Advertisement
3.
Replace 2 screws in the remaining 2 corners of the
fan, securing each with a nut (7 mm).
4.
Reconnect the in-line cable connector attaching the
fan cable.
1
Front grill
2
Release tab
3
Fan filter
4
Screw (T20)
Illustration 1.1 Door Fan Assembly
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss
and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
130R0766
5
Door fan front view
6
Nut (7 mm)
7
Corner bracket
8
Door fan back view
MI35M202
*MI35M202*
5.
Replace the filter over the fan on the outside of the
door.
6.
Reposition the fan grill over the filter and press to
snap into place.
03/2018
Advertisement
