Turn on the BLUETOOTH
function on the BLUETOOTH
device and perform the pairing
For details, refer to the operating
instructions of your BLUETOOTH
Select "MHC-V71" on the display
of the BLUETOOTH device.
Perform this step within 5 minutes,
otherwise pairing will be canceled.
In this case, repeat from step 3.
If passkey is required on the
BLUETOOTH device, enter "0000".
"Passkey" may be called "Passcode",
"PIN code", "PIN number", or
Establish connection with the
When pairing is completed and the
BLUETOOTH connection is
established, BLUETOOTH device
name appears on the display.
Depending on the BLUETOOTH
device, connection may start
automatically after pairing is
You can check the BLUETOOTH
device address by pressing DISPLAY
You can pair up to 8 BLUETOOTH
devices. If the 9th BLUETOOTH device is
paired, the oldest paired device will be
If you want to pair with another
BLUETOOTH device, repeat steps 1 to 6.
To cancel the pairing operation
Touch and hold
unit for 2 seconds or more until "BT
AUDIO" appears on the display.
To erase the pairing information
You can erase all pairing information
by resetting the system. See "Resetting
the system" (page 57).
After you reset the system, it may not be
able to connect with your iPhone/iPod. In
this case, delete the pairing information
of the system on your iPhone/iPod, then
perform the pairing operation again.
Listening to music on a
You can listen to music on the
BLUETOOTH device and control the
playback using the keys on the unit
or the remote control.
Check the following before playing
— The BLUETOOTH function of the
BLUETOOTH device is turned on.
— Pairing has been completed
Once the system and the
BLUETOOTH device are connected,
you can control playback by
pressing , , , / and
Touch BLUETOOTH on the unit to
select the BLUETOOTH function.
"BLUETOOTH" appears on the
PAIRING on the