Functions; First Use; Turning Off Machine; Filling The Water Tank - Breville the Bambino Plus Instruction Book

Functions

FIRST USE

1. Remove the water tank and fill with potable
water to the indicated MAX line. Replace
+
the water tank onto the machine.
2. Ensure that the drip tray is correctly
positioned on the machine.
3. Plug the power cord into the power outlet
and switch on.
+
4. Press the 1 CUP, 2 CUP or STEAM buttons
to turn the machine on.
5. Press the 1 CUP button and the machine
will commence its first use cycle.
6. Once complete, the machine will go
into ready mode and all lights will be
illuminated.
NOTE
The first use cycle is to rinse the machine and
prime the heating system.

TURNING OFF MACHINE

+
To turn the machine off, press the 1 CUP and
STEAM button simultaneously.
+

FILLING THE WATER TANK

Lift the water tank from the machine. Remove the
water tank lid and add potable water to the water
2s
tank, filling to the MAX marking indicated.
2s
Replace the water tank onto the machine,
ensuring it is properly attached and sitting
flush against the back of the machine.
If the 1 CUP, 2 CUP and STEAM buttons
illuminate, the water tank has been correct
attached.
The machine will detect when the water level is
low. The 1 CUP, 2 CUP and STEAM buttons will
not be illuminated.
When this occurs, add water to the water tank.
Once there is sufficient water, all buttons will be
illuminated and the machine can be used.
OFF
FILTER BASKETS
This machine includes dual wall 1 Cup and
2 Cup filter baskets.
OFF
+
MAX
+
1 CUP
OFF
2 CUP
9