Related Manuals for Lincoln Electric INVERTEC 165SX
Summary of Contents for Lincoln Electric INVERTEC 165SX
- Page 1 800036913 02/2018 REV00 ® INVERTEC 165SX OPERATOR’S MANUAL ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu...
-
Page 2: Declaration Of Conformity
2014/35/EU , 2014/30/EU, 2011/65/EU and has been designed in compliance with the following standards: EN 60974-1:2012; EN 60974-10:2014 01.08.2018 Piotr Spytek Operations Director Lincoln Electric Bester Sp. z o.o., ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland English English... - Page 3 Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment. Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible for damages caused by improper installation, improper care or abnormal operation.
- Page 4 CE COMPLIANCE: This equipment complies with the European Community Directives. ARTIFICIAL OPTICAL RADIATION: According with the requirements in 2006/25/EC Directive and EN 12198 Standard, the equipment is a category 2. It makes mandatory the adoption of Personal Protective Equipment (PPE) having filter with a protection degree up to a maximum of 15, as required by EN169 Standard.
-
Page 5: Electromagnetic Compatibility (Emc)
Electromagnetic Compatibility (EMC) This machine has been designed in accordance with all relevant directives and standards. However, it may still generate electromagnetic disturbances that can affect other systems like telecommunications (telephone, radio, and television) or other safety systems. These disturbances can cause safety problems in the affected systems. Read and understand this section to eliminate or reduce the amount of electromagnetic disturbance generated by this machine.. - Page 6 CONTENTS TECHNICAL DESCRIPTION ............. 2 DESCRIPTION .
-
Page 7: Technical Description
TECHNICAL DESCRIPTION TECHNICAL DESCRIPTION INSTALLATION DESCRIPTION IMPORTANT: BEFORE CONNECTING, PREPARING OR US- ING EQUIPMENT, READ SAFETY PRECAUTIONS. The system consists of a modern direct current generator for the welding of metals, developed via application of the inverter. This CONNECTING THE POWER SOURCE TO THE MAINS special technology allows for the construction of compact light ELECTRICITY SUPPLY. -
Page 8: Front Panel - Rear Panel
CONTROLS On the unit preset for coated electrode welding Picture 2. (Rif.1 - Pic. 1 page 3.). Adjust welding current with ampere selector (Rif.3 - Pic. 1 4 4 4 4 page 3.). Turn on the power source CONNECTION AND PREPARATION OF EQUIPMENT FOR GAS TUNGSTEN ARC WELDING (TIG) LIFT. -
Page 9: Maintenance
MAINTENANCE N. B.: the power source is fitted with an anti-sticking device that Carry out the following operations every three (3) months: disables power if output short circuiting occurs or if the electrode a. Replace any illegible labels. sticks, allowing it to be easily detached from the workpiece. This b.