Before Using For The First Time; Initial Use; Cleaning The Cooking Compartment; Cleaning The Accessories - NEFF U2ACH7C.0A Instruction Manual

KBefore using for the first
time
B efore you can use your new appliance, you must
B e f o r e u s i n g f o r t h e f i r s t t i m e
make some settings. You must also clean the cooking
compartment and accessories.

Initial use

As soon as the appliance is connected to the power
supply, ‚ƒ:‹‹ flashes in the display.
Setting the time
Use the ( or ) buttons to set the current time.
After a few seconds, the time that has been set is
adopted.
Changing the time
Press the v button repeatedly until the v symbol
1.
lights up.
Use the ( or ) button to change the time.
2.
After a few seconds, the time that has been set is
adopted.

Cleaning the cooking compartment

To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
Remove the accessories from the cooking
1.
compartment.
Remove any leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment.
Before heating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft,
damp cloth.
Set the specified type of heating and temperature.
4.
Main oven r
Settings
Type of heating Top/bottom
heating ƒ
Temperature 240 °C
Cooking time 1 hour
Keep the kitchen ventilated while the appliance is
5.
heating.
Switch off the appliance after the specified cooking
6.
time.
Wait until the cooking compartment has cooled
7.
down.
Clean the smooth surfaces with soapy water and a
8.
dish cloth.

Cleaning the accessories

Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
Top oven q
Top/bottom
heating ƒ
240 °C
1 hour

Before using for the first time

1Operating the appliance

Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to apply settings on
your appliance.

Switching the appliance on and off

Use the function selector to switch the appliance on or
off. Turning the function selector to any position other
than the "Off" position switches on the appliance. To
switch off the appliance, always turn the function
selector to the "Off" position.

Setting the heating function and temperature

It is very easy to apply the settings you require to your
appliance using the function and temperature selector.
To find out which heating function is best for which type
of food, please refer to the beginning of the instruction
manual.
Example in the picture: CircoTherm ‚ at 160 °C.
Use the function selector to set the heating function.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
The appliance starts heating after a few seconds.
Note: If œ flashes in the display, the temperature in the
cooking compartment is too high for the selected
operating mode. Switch the appliance off, wait until it
has cooled down and then switch it back on again.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Note: You can also set a cooking time and end time on
the appliance. ~ "Time-setting options" on page 14
Changing
The heating function and temperature can be changed
at any time using the relevant selector.
If you change the heating function, the temperature will
be changed to the corresponding default value.
en
13