Teltonika MVC100 Quick Start Manual

6. Press the Show default camera page button to Start your Internet browser (e.g. IE or Mozilla) with
default IP address http://10.0.0.1 (Make sure that cookies are enabled on your browser).
Enter the login username and password. The default administrator login settings are:
Login: admin
Password: admin
If the camera connection is lost close the CCT, unplug the power and USB, plug in again power and
USB and start CCT.
The welcome page of the WEB management interface after successful login to the camera is displayed.
From this menu all essential configuration pages are accessed.
Click Live view to view live video.
The camera is now ready for configuration. Further details for setting camera features please refer to
user's manual.

Accessing camera from the WEB

There are two ways to connect the EDGE camera from internet:
1. Use SIM card with public static IP address
2. Use SIM card with public dynamic IP address witch will be linked to static hostname
using DDNS service.
Note: If the SIM card is with private IP address then reaching camera from the internet is not
possible as connection is routed through a NAT firewall in your provider's network.
LEGAL NOICE
Copyright © 2009 TELTONIKA Ltd. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written permission of
TELTONIKA Ltd is prohibited.
Other product and company names mentioned herein may be trademarks or trade names of their
respective owners.
4
TELTONIKA
EDGE Camera (MVC100)
Quick Start guide v1.04

PACKAGE CONTENTS CHECKLIST

MVC100 EDGE Camera
External GSM antenna
AC/DC Power adapter (Euro or UK)
USB cable
Angled wall mount bracket
Leaflet "Quick Start Guide"
CD with software, drivers and
manual