Advertisement
Quick Links
DST Setting Module : 5161
Firstly, make sure it is in the
<Timekeeping Mode Screen>
Holding down (B) for at least two
seconds at any time will return
directly to the Timekeeping Mode.
1.
In the Timekeeping Mode,
hold down (A) button for
about three seconds until
ADJ appears on the display.
2.
Press (B) button twice to
enter the Daylight Saving
Time setting mode.
Timekeeping Mode.
Advertisement
Related Manuals for Casio 5161
Summary of Contents for Casio 5161
- Page 1 DST Setting Module : 5161 Firstly, make sure it is in the Timekeeping Mode. <Timekeeping Mode Screen> Holding down (B) for at least two seconds at any time will return directly to the Timekeeping Mode. In the Timekeeping Mode, hold down (A) button for about three seconds until ADJ appears on the display.
- Page 2 AUTO Use (C) button to toggle ON, OFF and AUTO. Press (A) button to return to the Timekeeping Mode.
Need help?
Do you have a question about the 5161 and is the answer not in the manual?
Questions and answers
Settings are correct and ON. Alarm doesn’t sound.
If the alarm is set correctly and shows as ON but is not sounding on the Casio 5161, possible reasons include:
1. The watch may be in a mode that prevents the alarm sound temporarily.
2. The alarm time may be set for a.m./p.m. incorrectly in 12-hour format.
3. The current time may not match the alarm time due to a timekeeping error or missed signal calibration.
4. The battery may be too low to produce sound.
5. The alarm tone may not be heard in a noisy environment or if the speaker is obstructed.
Check the a.m./p.m. setting, ensure the time is accurate, and confirm the battery is functioning.
This answer is automatically generated
Möchte den großen Zeiger um etwa 8 Minuten nach vorne verschieben damit er mit Digital Anzeige übein stimmt.
To adjust the hour hand on a Casio watch model 5161 to align with the digital display, follow these steps:
1. Press and hold the light button past the adjust screen until you enter hand set mode.
2. Use the lower button to advance the hands:
- Press once to move the hand step by step.
- Press and hold to make the hands move continuously.
- Press again to stop the movement.
3. Adjust the hands until they align correctly with the digital display.
4. Exit hand set mode once the adjustment is complete.
This process ensures the analog hands match the correct digital time.
This answer is automatically generated
set month day
set year day
how to set current date
I cannot make my 5161 make the adjustments to change the time. It didn't change automatically this spring