Table of Contents
Advertisement
SPECIFICATION FOR GTW-P50M603 PLASMA DISPLAY
2.4.
Display Performance Requirements:
The data of display performance are measured based on the following
conditions unless otherwise specified.
a. Ambient temperature
b. Warm up period
c. Line input voltage:
d. Viewing distance
e. Display mode
f. Brightness condition
2.4.1 Maximum Resolution:
2.4.2 Horizontal Size (Standard)
Vertical Size (Standard)
2.4.3 Horizontal Size (Max.)
Vertical Size (Max.)
2.4.4 Maximum Brightness Level:
a. 100% center block white
pattern (mosaic)
b. Raster background
2.5.
Operation:
Main unit button
IR Remote Control
25±5 ℃
30 minutes Min.
100 Vac ~ 240 Vac (50 / 60 Hz)
Distance from screen is 81 cm
Test with window white pattern mode if not specified.
Press recall bottom to set default brightness
Support to 1280 x 1024
1106.5±8 mm (for mode 1～31)
622.1±8 mm (for mode 1～31)
Mode 1~31 over full-scan
Mode 1~31
over full-scan
Timing Mode 1
More than 25FL
(while pressing recall button to set default brightness)
Less than 0.4FL
(while pressing recall button to set default brightness)
Main power switch (power ON /OFF)
Power ON/OFF
Input Select (TV -> AV1 ->AV2[S] -> COMPONENT 1 ->
COMPONENT 2-> RGB -> DVI->TV run in cycle)
Menu key -,+
Adjustment -,+
Power on/off
MUTE
Display
Input Select (same as Main unit button)
Volume -,+
Wide:
TV/AV1/AV2[S]/COMPONENT 1/2 input:
PANORAMA/4:3/16:9
(ZOOM1/ZOOM2/ZOOM3/OFF for 16:9 only)
Analog RGB input: 4:3/16:9
Menu -,+
Adjustment -,+
RECALL
PIP, SOURCE, SWAP, POSITION
USE FOR TV MODE:
V-CHIP/SET
FAV.CH, FAV.SET, QV, CCD, MTS, CH LOCK,
SLEEP TIMER,
Number Select, CH ▲▼
DIRECT KEY:
POWER ON, POWER OFF, RGB, TV, AV1, AV2,
COMPONENT1/2, DVI
2-4
VER1.0
Advertisement
Table of Contents
