Table of Contents
Advertisement
SPECIFICATION FOR GTW-P50M603 PLASMA DISPLAY
6.5
AGC Characteristics
AGC Figure Of Merit
RF signal range in which video at PDP drops 6 dB from output level obtained
with 100mV input.
6.6
RF AGC Cut In Level
6.7
FM/AM Rejection (100mV at SIF input)
6.8
Noise Limits Sensitivity
7.
Reliability Requirement:
The MTBF needs 20000hrs under operation 25±5℃(half luminosity, motion picture)
8.
REGULATORY REQUIREMENTS:
8.1
Safety Requirement:
a. UL
b. CSA
c. TUV
8.2
Emission Requirement:
The unit shall meet the EMI limits in all screen modes. For EMI testing, the unit must be failed
with the screen pattern consisting of scrolling capital "H" characters also the brightness
contrast will be adjusted to max. Level.
a. FCC class B part 15
8.3
Transit test
a.
Drop Test
b.
Vibration Test
1.
Forward and backward
2.
Right and left
3.
Up and down
8.4
Power Management:
Mode
Normal
Stand-by
Power saving
This Plasma display is Energy star compliant when used with a computer equipped with DPMS.
Note: The power indicator LED color is green in normal state, yellow in stand-by and
power saving state.
Safety of information technology equipment including
electrical business equipment
Safety of information technology equipment including
electrical business equipment
H-sync
V-sync
Pulse
Pulse
No pulse
No pulse
Pulse
No pulse
No pulse
Pulse
2-7
50dB Min.
55dB ±2dB
14dB min
VHF 45dB max
UHF 49dB max
200mm max.
30 minutes 1000 c.p.m
30 minutes 1000 c.p.m
30 minutes 1000 c.p.m
Video
Active
No video
Blanked
VER1.0
Power dissipation
Normal power
Less than 10 watts
Less than 10 watts
Advertisement
Table of Contents
