VTech VM3261 Quick Start Manual

VM3261
Go to www.vtechphones.com
to register your product for enhanced
VM3261-2
warranty support and the latest VTech
product news.
Video Monitor
＞1m (3ft)
＜1m (3ft)
Quick start guide
What's in the box
VM3261 VM3261-2
＞1m (3ft)
＞1m (3ft)
＜1m (3ft)
1
Connect the baby monitor
＜1m (3ft)
NOTES NOTE
• The rechargeable battery is pre-installed in your parent unit.
• Use only the power adapters supplied with this product.
• Make sure the baby monitor is not connected to the switch controlled electric outlet.
• Connect the power adapters in a vertical or floor mount position only. The adapters' prongs are
not designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-
the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.
2
Power on the baby monitor
Slide the ON/OFF switch to power
Press and hold to power on your
on your baby unit. parent unit.
3
Positioning the baby monitor
> 3ft (1m)
＞ 3ft (1m)
＜3ft (1m)
Caution
• The default volume of your parent unit
Press and hold
is level 3, and the maximum volume is
level 5. If you experience high-pitched
screeching noise from your baby
monitor while positioning:
Tilt - Make sure your baby unit and parent unit
Pan
are more than 1 meter (3 feet) apart, OR
(Manual
(Parent unit
- Turn down the volume of your parent unit.
control)
remote control)
4
Status check
Talk to your baby unit
Once you power on both your baby unit and parent unit, your
parent unit displays image from the baby unit, and the LINK
Press and hold TALK and speak to your parent unit. Your
LED light turns on.
voice is transmitted to the baby unit.
The POWER LED light of baby unit turns on.
Pan, tilt, zoom
Basic operation - Parent unit
Press and hold
upward, downward, leftward or rightward.
Adjust speaker volume
Press VOL+ / VOL- to adjust your parent unit speaker volume. It
determines the volume of sound transmitted from your baby units.
Press to zoom in or out.
Turn off the screen
Press and hold LCD ON/OFF to switch off the screen. You can still hear
sound from the selected baby unit.
Tip
• Press any keys on the parent
Long press
unit to turn on the screen
again.
Use the menu
Press MENU to enter the menu, or save a setting.
You can use the parent unit for advanced settings
or operations, such as to play or stop the baby unit
lullaby, or to adjust the baby unit sound sensitivity.
Press and hold
While in the menu:
• Press or to scroll among the menu options.
• Press SELECT or to enter the desired submenu.
• Press or to select an item.
• Press SELECT to confirm your selection.
• Press or to exit the submenu.
Submenu
Main menu
, , or to pan or tilt the image
Turn off the parent unit
Press and hold to power off your parent unit.
Press and hold
Long press