VTech VM3251 Quick Start Manual

Go to www.vtechphones.com VM3251
for the latest VTech product news.
VM3251-2
Video Monitor
Quick start guide
What's in the box
VM3251 VM3251-2
1
Connect the baby monitor
NOTE NOTES
• The rechargeable battery is pre-installed in your parent unit.
• Use only the power adapters supplied with this product.
• Make sure the baby monitor is not connected to the switch controlled electric outlet.
• Connect the power adapters in a vertical or floor mount position only. The adapters' prongs are
not designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-
the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.
2
Power on the baby monitor
Slide the ON/OFF switch to power
Press and hold to power on your
on your baby unit. parent unit.
2s
3
Positioning the baby monitor
> 3ft (1m)
＞3ft (1m)
＜3ft (1m)
Caution
• The default volume of your parent unit
is level 3, and the maximum volume is
level 5. If you experience high-pitched
screeching noise from your baby
monitor while positioning:
- Make sure your baby unit and parent unit
are more than 1 meter (3 feet) apart, OR
- Turn down the volume of your parent unit.
4
Status check
Once you power on both your baby unit and parent unit, your parent unit displays image
from the baby unit, and the LINK LED light turns on.
The POWER LED light of baby unit turns on.
Basic operation - Parent unit
Adjust speaker volume Zoom
Press VOL+ / VOL- to adjust your parent Press to zoom in or out.
unit speaker volume. It determines the
volume of sound transmitted from your
baby units.
Talk to your baby unit Use the menu
Press and hold TALK and speak to your Press MENU to enter the menu, or save
parent unit. Your voice is transmitted to a setting. You can use the parent unit for
the baby unit. advanced settings or operations, such as to
play or stop the baby unit lullaby.
While in the menu:
Press and hold
• Press or to scroll among the menu
options.
• Press to enter the desired submenu.
• Press or to select an item.
• Press SELECT to confirm your selection.
Submenu
Main menu
Turn off the screen Turn off the parent unit
Press LCD ON/OFF to switch off the Press and hold to power off your
screen. You can still hear sound from the parent unit.
selected baby unit.
2s
Tip
• Press any keys on the parent unit to turn on
the screen again.