REBOTEC / BA No.: 02.06.083/2016-12 Product description Table of Contents General suggestions Introduction Symbols Intended proper use Use and storage Features Warranty Spare parts orders, complaints Reuse, lifetime Disposal Safety advisories, use Product specifications Scope of delivery Technical specifications Spare parts, accessories...
Unauthorized changes made to the product, without the consent of the manufacturer will void Danger – Follow safety instructions! the warranty. The delivery date written on the REBOTEC- delivery note applies as the valid start date Care Maintenance of the warranty period.
REBOTEC / BA No.: 02.06.083/2016-12 6. Safety advisories for use Warning! Danger of Injury! At surface temperatures over 40°C (104°F), When using the chair, the following there’s a risk of injury. Therefore do not expose safety instructions must be observed:...
REBOTEC / BA No.: 02.06.083/2016-12 8. Spare parts, accessories Dimensions (ca.) Konstanz A. height 1010 mm 990-1040 mm Article No. Name B. width 570 mm 570 mm Spare parts list C. depth 630 mm 630 mm 301. * Commode pan with lid D.
REBOTEC / BA No.: 02.06.083/2016-12 10. Using the chair 10.3 Swivelling the armrests outwards By pulling out the locking pin, the locking When using the chair, the following points mechanism is disengaged and the armrests may must be adhered to: be swivelled back.
REBOTEC / BA No.: 02.06.083/2016-12 Step 2 11. Troubleshooting Using an Allen wrench (A/F 5 mm), completely remove the screws (LH rotation) in the frame. Fault Poss. cause Correction When loosening the screws, press against the Armrests do Locking pins are locking nut (underside).
Never make any unauthorised modifications or conversions to the chair. These will only adversely affect the safety and function of the chair. In such cases REBOTEC assumes no liability! Follow all the instructions when ordering spare parts, re-use and product lifetime of the chair.
Need help?
Do you have a question about the Köln and is the answer not in the manual?
Questions and answers