Table of Contents
Advertisement
OPERATION
Auto Quiet Mode
Auto Quiet shortens the tone for the selected audio
approximately 3 seconds after a radar or safety radar sig-
nal is detected. The shorter tone will resume for any new
signal within 20 seconds. Auto Quiet does not affect VG-2
or laser alerts.
• Press Quiet (before a signal is detected) to engage Auto
Quiet. Display reads:
• Once the Auto Quiet mode is engaged, you may cancel
the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
Quiet Mode
Quiet cancels audio during an alert and any new alert with-
in 20 seconds. After 20 seconds, 2 beeps are provided on
any new alert and the unit then remains quiet.
• Press Quiet to cancel the audio.
• Press Quiet a second time while unit is alarming to
restore the standard audio alert pattern; or turn the unit
off, then on.
10
OPERATION
City Mode
W h i s t l e r's City Mode is designed to reduce the annoyance of auto-
matic door openers, intrusion alarms and other devices which
s h a re frequencies with police radar.
• P ress City to engage City. Display re a d s :
• P ressing City a second time cancels City. Display re a d s :
In City Mode, weak speed/safety radar signals give an initial alarm
of two beeps, and then remains quiet unless the signal becomes
v e ry strong. When the signal strength increases, two additional
beeps are pro v i d e d .
Highway Mode
Highway mode provides full audio warnings any time radar (X, K, Ka,
Safety) signals are detected, and is recommended for open ro a d
driving. Highway mode is automatically engaged after the unit is
t u rned on and completes the self-test.
Dim/Dark Mode
Dim/Dark Mode reduces the illumination of the display.
• P ress Dark once to reduce illumination to a Dim setting.
Display re a d s :
• P ressing Dark a second time engages Dark Mode.
Display re a d s :
Dim or dark can be engaged during an alert. In Dark Mode, the
display goes dark for as long as a signal is being detected and for
20 seconds after, then the display re t u rns to the dimmer setting.
• P ressing Dark a third time re s t o res full illumination to the display.
11
Advertisement
Table of Contents
