Datafox EVO 3.5 Pure Manual page 3

Alternations
Alternation in this Dokument
Date Chapter
06.08.2017 all
Alternations of the version
With the device generation IV a new versioning scheme has been introduced. According to this
scheme the file name of the device firmware and the setup program (DatafoxStudioIV) is composed
as follows:
Product name XX.
Device genera-
tion
z. B. AE-MasterIV 04.
The use of the manual depends on the version of the firmware and the DatafoxStudioIV or the
DFComDLL. Gather from the following table which manual matches which version. For different
combinations no support can be offered.
Firmware StudioIV and DLL validity
Firmware: 4.03.09.xx.
Studio: 4.03.09.xx
Dll: 4.03.09.xx
The DatafoxStudioIV is backward compatible. This means that you can configure a device with a
newer DatafoxStudioIV also older firmware, the device only supports the natural functions that are
implemented in the older firmware version. Ie, relevant to the functions that are possible, is always
the manual state that the firmware associated with the Setup equivalent. It is not possible to provide
a centering firmware configured with a stand of DatafoxStudioIV to who is older than the firmware.
recommendation:
If possible, use always the current version of DatafoxStudioIV.
What features are supported in which software versions, is from the file:
Datafox MasterIV, SW version xxx.pdf list as shown.
The file is located on the Datafox DVD and for download on the homepage. Please also note the
instructions in each chapter in the manual. The updates are available on our website under
www.datafox.de download.
Handbuch Datafox EVO 3.5 Pure
Discription
Revision the manual to new version 04.03.10.xx
YY.
Compatibility
(which versions
can be used to-
gether)
03.
Seite III
ZZ. Build
Version number Troubleshooting
(functional exten- (with a new version
sion) the Build number is
reset)
9. 04
Datum: 06.08.2018 Version: 04.03.07.XX