Cookies Function - Sage Smart Oven Pro Instruction Book

Hide thumbs Also See for Smart Oven Pro:
Table of Contents

Advertisement

A note on pizza stones
When using a pizza stone, it is necessary
to first heat the stone (without a pizza) for
optimum results.
1. Insert the wire rack, with the spokes
facing upward, into the middle rack
height position.
2. Place pizza stone on the center of the wire
rack so air will flow around all sides of
the stone.
3. Close the door.
4. Turn the TIME dial to the left to reduce the
time to ':15 MINS'. The time is displayed
as the bottom figure on the LCD screen.
The preset CONVECTION and FROZEN
settings will also be displayed.
5. Press the START/CANCEL button to
activate the PIZZA function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange. The LCD screen will
indicate a blinking 'PREHEATING'.
6. Once the oven has reached the set
temperature, the temperature alert
will sound.
7. After the PREHEATING alert has sounded,
the timer will automatically begin to
count down.
8. At the end of the cycle, the oven alert will
sound. The START/CANCEL button
backlight will go out and the LCD screen
will illuminate blue.
9. Open the oven door and carefully place
frozen pizza on the heated pizza stone.
When cooking fresh pizza, carefully remove
the entire wire rack with pizza stone using
insulated oven mitts. Place on the counter
and transfer the fresh pizza dough onto
the heated stone before placing back into
the oven.
10. Select desired PIZZA setting and press the
START/CANCEL button to re-start the
PIZZA cycle.

COOKIES FUNCTION

The COOKIES function is ideal for baking
homemade or commercially prepared cookies
and other baked treats.
Ready-to-bake crescent rolls, cinnamon scrolls,
biscuits and strudels are ideally baked using
this function.
1. Insert the wire rack, with the spokes
facing upward, into the middle rack height
position.
2. Close the oven door.
3. Turn the FUNCTION dial until the
indicator on the LCD screen reaches
the COOKIES function. The top figure
on the LCD screen indicates the preset
temperature of 175°C, while the bottom
figure indicates the preset time of
':11 MINS'. The preset CONVECTION
setting will also be displayed.
4. The baking temperature and time can be
adjusted before or during the cookie cycle.
a) The baking temperature is displayed as
the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
baking temperature from 50°C/120°F to a
maximum of 230°C/450°F.
b) The baking time is displayed as the bottom
figure on the LCD screen. Turn the TIME
dial to adjust the time up to 1 hour.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents