Bake Function - Sage Smart Oven Pro Instruction Book

Hide thumbs Also See for Smart Oven Pro:
Table of Contents

Advertisement

BAKE FUNCTION

The BAKE function cooks food evenly
throughout. This function is ideal for baking
cakes, muffins, brownies and pastries. The
BAKE function is also ideal for cooking pre-
packaged frozen meals such as lasagna and
pot pies.
1. Insert the wire rack, with the spokes facing
upward, into the bottom rack height
position. Note that some baked goods, such
as brownies or pastries, may be more suited
to the middle rack height position.
2. Close the oven door.
3. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
BAKE function. The top figure on the
LCD screen indicates the preset BAKE
temperature of 160°C, while the bottom
figure indicates the preset time of
':30 MINS'. The preset CONVECTION
setting will also be displayed.
4. The baking temperature and time can be
adjusted before or during the baking cycle.
a) The baking temperature is displayed as
the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
baking temperature from 50°C/120°F to a
maximum of 230°C/450°F.
b) The baking time is displayed as the bottom
figure on the LCD screen. Turn the TIME
dial to select up to 2 hours for temperatures
above 150°C/300°F and up to 10 hours for
temperatures below 150°C/300°F.
16
5. Press the START/CANCEL button to
activate the BAKE function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange. The LCD screen will
indicate a blinking 'PREHEATING'.
6. Once the oven has reached the set
temperature, the temperature alert
will sound.
7. Place food, positioned on the included
roasting pan or other oven-proof dish, on
the center of the wire rack so air will flow
around all sides of the food.
8. After the PREHEATING alert has sounded,
the timer will automatically begin to count
down. The temperature and time can be
adjusted during the baking cycle by turning
the corresponding TEMPERATURE and
TIME dial. The cycle can be stopped at any
time by pressing the START/CANCEL
button.
START/CANCEL
PRESS
TEMPERATURE
9. At the end of the BAKE cycle, the oven alert
will sound. The START/CANCEL button
backlight will go out and the LCD screen
will illuminate blue.
PREHEATING
WHEN AT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents