Setting Up The Language Options; Setting Up The Audio Options - Samsung DVD-VR355 Instruction Manual

Language
DVD-Recorder
No Disc
Timer Rec.
Audio Original
Setup Subtitle : Automatic English
Français
Disc Menu : English
Deutsch
On-Screen Menu : English
Español
Italiano
Nederlands
Korean
MOVE ENTER RETURN EXIT
DVD-Recorder Audio
No Disc
Timer Rec.
Digital Output : PCM
PCM
Setup DTS : Off Bitstream
Dynamic Compression : On
MOVE ENTER RETURN EXIT
DVD-Recorder Audio
No Disc
Timer Rec.
Digital Output : PCM
DTS : Off
Setup Off
Dynamic Compression : On On
MOVE ENTER RETURN EXIT

Setting Up the Language Options

If you set the language options in advance, they will come up
automatically every time you watch a movie.
▲
►
1. With the unit in Stop mode/No Disc mode, press the MENU button.
►
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
►
button.
3. Press the ▲▼ buttons to select Language, then press the ENTER or
▼
► button. The Language setup menu will be displayed.
4. Press the ▲▼ buttons to select the desired language option, press the
ENTER or ► button.
• Audio : For the disc audio language.
• Subtitle : For the disc subtitles.
• Disc Menu : For the disc menu contained on the disc.
• On-Screen Menu : For the on-screen menu of your DVD Recorder & VCR.
5. Press the ▲▼ buttons to select the desired language, then press the
ENTER or ► button.
■ If the selected language is not recorded on the disc, the original
pre-recorded language is selected.
■ The selected language will only appear if it is supported on the disc.

Setting Up the Audio Options

Allows you to setup the audio device and sound status settings
depending on the audio system in use.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select Audio, then press the ENTER or ►
button. The Audio setup menu will be displayed.
4. Press the ▲▼ buttons to select the desired audio option, then press
the ENTER or ► button.
5. Press the ▲▼ buttons to select the desired item, then press the
ENTER or ► button.
▌ Digital Output
• PCM : Converts to PCM(2CH) 48kHz audio.
►
Select PCM when using the Analog Audio Outputs.
►
►
• Bitstream : Converts to Dolby Digital Bitstream.
Select Bitstream when using the Digital Audio Outputs.
■ Be sure to select the correct Digital Output or no audio will be heard.
▌ DTS
• Off : Doesn't output digital signal.
►
• On : Outputs DTS bitstream. (via Digital Audio Output)
►
►
Select DTS when connecting to a digital amp with a DTS decoder.
■ When a DTS soundtrack is played, sound is not output from the
Analog Audio Output (AV OUT).
English - 32