Samsung SHR-1040K User Manual page 49

SHR-1040/1040K USER'S MANUAL
(3) RECORD LOCK
If you set RECORD LOCK to ON and press STOP to release the current recording, you are prompted to
enter the PASSWORD.
(4) HDD ERASE
If you exit the Menu after setting HDD ERASE to ON, you will see the following message that asks if you
want to erase the data on the HDD. If you click OK, you'll see "HDD ERASE" as in the next picture, and the
existing HDD Data is erased. If you click CANCEL, the HDD data will not be erased.
[ON/OFF]
(5) FACTORY RESET
When FACTORY RESET is enabled, the settings are reset to the factory default.
If you exist the menu after setting FACTORY RESET to ON, you'll see the following mes-
sage that asks if you want to perform FACTORY RESET. If you click OK, the settings are
reset to the factory default with a message of "FACTORY RESET" as in the next picture. If
you click CANCEL, FACTORY RESET will not perform.
[ON/OFF]
6-11
English
Caution
Caution
Deleted data cannot be restored. Check data carefully again before deleting data.