Table of Contents
Advertisement
01616A DVD-V8000/TWN-Eng4
8/27/56 8:58 AM
Page 48
Basic Recording
GB
You can record a TV show in progress by inserting a blank tape and
pressing the REC button. You can even add time in fixed 30-minute
increments by pressing the REC button repeatedly; see page 50.
NOTE:
Before You Begin...
1
2
2
3
3
1
3
48
Be sure you videotape has a Record Safety Tab. If the tab
is missing, you can cover the opening with a small piece of
tape. Warning: Do not cover this opening unless you are
sure you want to record over the tape.
• Power on the DVD-VCR
• Power on the TV
• Set the TV to channel 3 or 4 (whichever the switch is set to
on the back of the DVD-VCR).
Insert Tape
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the entire program.
To change the Recording Speed, see page 51.
Select a Channel to Record
Use the 0–9 buttons or the Channel Up/Down arrow buttons to
select the desired channel, or press the TV VIEW button to select
Line 1 or Line 2 if recording from an external device connected to
the front or rear Line inputs, respectively.
Start Recording
Press the REC button on the remote control or front panel.
For options while recording is in progress, see "Special Recording
Features" on the next page.
Special Recording Features
While a recording is in progress, you can watch a different channel,
watch a DVD, or add recording time in 30-minute increments.
1
Pause/Resume Recording
Press the Play/Pause button. Press REC again to resume.
2
Stop Recording
Press the STOP button.
3
Watch a Different Channel
Press the TV/VCR button on the remote to switch to your TV tuner,
then select a different channel on your television.
4
To Watch a DVD
Insert a DVD in the DVD deck and press Play. The TV View will
automatically change to the DVD.
5
Add Recording Time
See One-Touch Recording (OTR) on the next page.
GB
1
2
3
4
49
Advertisement
Table of Contents
