Vcr Recording; Basic Recording - Samsung DVD-V2000 Instruction Manual

Basic Recording
You can record a TV show in progress by inserting a blank tape and
pressing the REC button. You can even add time in 30ominute
increments up to 4 hours by pressing the REC button repeatedly;
see page 49.
NOTE: Be sure you videotape has a Record Safety Tab. If the tab
is missing, you can cover the opening with a small piece of
tape. Warning: Do not cover this opening unless you are
sure you want to record over the tape.
Before You Begin...
• Power on the DVD.VCR
• Power on the TV
• Set the TV to channel 3 or 4,
1 Insert Tape
Insert a blank VHS tape into the VCR deck
• Make sure the tape is long enough to recordthe entire program.
To change the Recording Speed, see page 49.
2 Select a Channel to Record
Use the 0-g buttons or the Channel Up/Down arrow buttons to
select the desired channel, or press the INPUT SEt button to
select Line 1 or 2 if recording from an external device connected 1o
the front or rear Line inputs, respectively.
3 Start Recording
Press Ihe REC button on the remote controlor front panel.
For options while recording is in progress, see "Special Recording
Features"on the next page.
_" Recording [rum the DVD player to the VCR is not
possible
!
i