Way Call Conferencing; Call Waiting; Volume Control; Receiving A Call - LG LSP-4000(P) User Manual

Basic Operations
4. The call is connected and you may start
conversation.
5. To disconnect the call, replace the handset or
press button.
※ You can also dial any of the last 120
(Missed+Received+Dialled+In Call Memo)
numbers stored in All Calls.

3.4 3 way call conferencing

You can start 3 way call conferencing.
1. Dial second party phone number while you are in
conversation with the first party.
2. To make conference call, press '3' +
button.
This service should be provided by your service
provider.
16

3.5 Call Waiting

While a call is in progress, you may hear two beeps
indicating another incoming call.
When call wait is enabled, you may put the active call
on hold while you answer the other incoming call.
1. Press Clear or END/PWR button, Call
Waiting window then disappears.
2. Press Dial/Flash button, you may start
conversation with called number.
3. Re-press Dial/Flash button, you may start
conversation with previous number.
Dial/Flash

3.6 Volume Control

1. Press Up/Down button of navigation while in a
call, to adjust earpiece volume.
Mute
2. Press Soft key 2 to prevent sound from
your end during the call. To cancel Mute, Press
Unmute
again Soft key 2 .
Message END/PWR
● ● ● ● ● ● ● ● ● ● ● ●
Soft Key 1 Soft Key 2
To scroll in Menu, press ▲ or ▼ button.
Menu Mic Level
3. Press Soft key 1 + 3( ) during a
call and select Low or High by pressing Soft key 2
Next
or Press Up/Down button, to adjust MIC
volume. (Not used In PCO product)

3.7 Receiving a Call

When the bell rings in idle state, you can receive a call
as follows
1. Pick up the handset or press the
Speaker Phone button.
2. Start a conversation.
3. To disconnect the call, replace the handset or
press the Speaker Phone button.
Basic Operations

3.8 In Call Memo

(Not used In PCO product)
Allow you to store number during the call.
To store number:
1. Press Soft key 1 Menu +
1( ).
In Call Memo
2. Enter up to 32 numbers using the keypad.
Add
3. Press Soft key 1 to save.
To retrieve an In Call Memo:
1. Press Dial/Flash button to see saved number.
Note: You can store the number by pressing Soft key
Add
1 .

3.9 Lock Mode

Protects your phone from unauthorized use. Once the
phone is locked, it is in restricted mode, until the in
lock code is entered. This will allow you to receive
17