Samsung AVMKH020EA4 Service Manual page 100

No Parts
5 Stepping Motor
6 Display PCB
Samsung Electronics
Procedure
1) Remove the screws in rear side of Front
Cover assembly as shown in picture.
2) Remove the screws as shown in picture.
3) Disassemble the Blade and Stepping
Motor assembly and remove the screws
Stepping Motor.
1) Remove the screws in rear side of Front
Cover assembly as shown in picture.
2) Disassemble Display PCB assembly
and disconnect wire.
3) Disassemble the Display PCB.
Disassembly and Reassembly
Remark
4-56