Setting Up The Audio Options - Samsung DVD-HD950 User Manual

C S
H A N G I N G E T U P M E N U

Setting Up the Audio Options

Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to Language Setup
Audio Setup
select Setup, then press
Display Setup
the ❿ or ENTER button.
Parental Setup :
EZ Setup
Setup
3
Press the /❷ buttons to Language Setup
Audio Setup
select Audio Setup, then
Display Setup
press the ❿ or ENTER
Parental Setup :
button.
EZ Setup
Setup
4
AUDIO SETUP
Dolby/DTS Digital Out : PCM
Press the /❷ buttons to
Dynamic Compression : On
select the desired item,
PCM Down Sampling : On
Speaker Setup
then press the ❿ or
ENTER button.
ENG-60
❿
❿
❿
❿
❿
❿
❿
❿
❿
❿
To exit the setup menu, press the MENU
button.
❿
C S
H A N G I N G E T U P M E N U
Dolby/DTS Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
. Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
Speaker Setup (See pages 62~63)
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS),
you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling to On.
- SACD audio is only available through the analog outputs. It is not possible to output
SACD audio via the HDMI output or Digital Audio Output.
Note
• To exit the setup menu, press the MENU button.
• DVD-AUDIO
- Outputs 2 channel digital audio only.
- Some DVD-AUDIO discs do not downmix, so they will not output 2 channel digital audio.
- MULTI channel DVD-AUDIO discs play back through the analog outputs.
• Super Audio CD
- Outputs analog signals only.
- Super Audio CD audio is only available through the analog outputs.
It is not possible to output Super Audio CD audio via the HDMI output or Digital Audio Output.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
ENG-61