Setting Up The Audio Options - Samsung DVD-L100 Manual

I ENGLISH ]
Setting Up the Audio Options
1. With the unit in Stop mode, press the SETUP button.
2. Use the UP/DOWN buttons to select Audio. Then press the ENTER button.
3. Use the UP/DOWN buttons to select the desired item. Then press the LEFT/RIGHT buttons.
(i) Digital Output
1. PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the
Digital Audio Output.
NOTE.' Be sure to select the correct Digital Output or no audio will be heard.
(2)DTS
1. Off : Digital signal is not output.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
C3_ Dynamic Comp.(Compression)
1. On : To select dynamic compression.
2. Off : To select the standard range.
(4)2x Scan Audio
1. Off : Turns 2X audio off. Though 2X Scan Audio is ON in the SETUP MENU, no sound will be heard
on discs which are recorded with LPCM, DTS or MPEG-2 Audio.
2. On : Turns 2X audio on.
NOTE."
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of DoIby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
,,&