Controlling A Tv With The Remote; Troubleshooting - Samsung DVD-HD950 User Manual

C h a p t e r 6
R
E F E R E N C E
Controlling a TV with the Remote control
The remote control can also be set up to control most TVs. To program the remote
control, use the code that corresponds to your brand.
TV Codes
BRAND CODE
ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 NORDMENDE
AIWA 82
BANG&OLUFSEN 57 PANASONIC
BLAUPUNKT 71
BRANDT 73 PHONOLA
BRIONVEGA 57 PIONEER
CGE 52 RADIOLA
CONTINENTAL EDISON 75 RADIOMARELLI
19, 20, 23, 24, 25, 26, 27, 28, 29,
DAEWOO
30 , 31, 32, 33, 34
EMERSON 64
FERGUSON 73 SALORA
FINLUX 06, 49, 57 SAMSUNG
FORMENTI 57
FUJITSU 84 SCHNEIDER
GRADIENTE 70 SELECO
GRUNDIG 49, 52, 71
HITACHI 60, 72, 73, 75 SIEMENS
IMPERIAL 52
JVC 61, 79 SINUDYNE
LG 06, 19, 20, 21, 22, 78
LOEWE 06, 69 TELEAVA
LOEWE OPTA 06, 57 TELEFUNKEN
MAGNAVOX 40 THOMSON
METZ 57 THOMSON ASIA
MITSUBISHI 06, 48, 62, 65 TOSHIBA
MIVAR 52, 77
NEC 83
NEWSAN 68
NOBLEX 66
1.Turn on the TV.
2.Point the DVD's remote control at the TV.
3.While holding the TV POWER button down, enter the code for your brand.
4.If the TV turns off, setup is complete. Enter other codes of the same brand if the
first code does not work.
You can control the TV POWER, CH ( ,
functions of another manufacturer's TV.
- The remote control may not be able to control every model TV of the brands listed.
-
If you replace the remote control's batteries, set the brand code again.
e.g) For Samsung TVs
While holding down the TV POWER button, enter 0 and then 1.
ENG-70
BRAND CODE
72, 73
NOKIA 74
53, 54, 74, 75
PHILIPS 06, 55, 56, 57
06, 56, 57
58, 59, 73, 74, 75
06, 56
57
RCA 45, 46
REX 74
SABA 57, 72, 73, 74, 75
74
01, 02, 03, 04, 05, 06, 07, 08, 09
SANYO 41, 42, 43, 44, 48
06
74
SHARP 36, 37, 38, 39, 48
71
SINGER 57
57
SONY 35, 48
73
67, 73, 75, 76
72, 73, 75
80, 81
47, 48, 49, 50, 51, 52
WEGA 57
YOKO 06
ZENITH 63
), VOL (+, -) and TV/VIDEO
R
E F E R E N C E

Troubleshooting

Before requesting service (troubleshooting), please check the following.
Problem
No operations can be • Check the batteries in the remote control.
They may need replacing.
performed with the
• Operate the remote control at a distance of no more than 20 feet.
remote control.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
5.1 channel sound is • 5.1 channel sound is reproduced only when the following conditions are met. :
not being reproduced.
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "5.1 ch" mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
• The features or action cannot be completed at this time because:
The icon appears
on screen. 1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out of range.
Disc Menu doesn't appear. • Check if the disc has a Menu.
Play mode differs from • Some of the functions selected in the Setup Menu may not work properly if the
the Setup Menu
disc is not encoded with the corresponding function.
selection.
The screen ratio • The Screen Ratio is fixed on your DVDs.
cannot be changed.
• Make sure you have selected the correct Digital Output in the Audio Options
No audio.
Menu.
The screen is blocked
• Press the button for more than 5 seconds with no disc inside and the tray
closed. All settings will revert to the factory settings.
• Press the button for more than 5 seconds with no disc inside and the tray
Forgot password
closed. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
If you experience other
• Go to the contents and find the section of the instruction book that contains
problems.
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center or call 1-800-SAMSUNG.
The picture is noisy or • Make sure that the disc is not dirty or scratched.
distorted
• Clean the disc.
ENG-71
Action
Page
P5
P8
P21
P60~61
P53~69
P64~65
P60~61
P23
P67~69
P4