Basic Functions; Playing A Disc - Samsung DVD-1080PR User Manual

basic functions

Playing a Disc

Before Play
- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV's
remote control.
- If you connected the DVD player to an external Audio System, turn on your Audio System and
set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, the screen
to the right appears: If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want
to use.
Once you select a menu language, you can change it by pressing the
on the front panel of the unit for more than 5 seconds with no disc in the unit. Then
the SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
Playback
1
Press the OPEN/CLOSE
( ) button the tray opens.
2
Place a disc gently into the
tray with the disc's label
facing up.
3
Press the PLAY ( ) button
or OPEN/CLOSE ( ) button
to close the disc tray.
Touche
Drücken Sie
Premere
Druk op
button
RESUME function
When you stop disc play, the player
remembers where you stopped, so when you
press the PLAY ( ) button again, it will pick up
where you left off.
Select Menu Language
Press 1 for English
2 pour Français
3 für Deutsch
Pulsar 4 para Español
5 per Italiano
6 voor Nederlands
English _19