- Before connecting other components to this player, be sure to turn them off. - Be sure to remove the disc and turn off the player after use, especially if you are not going to use it for a long time.
TV's screen size (16:9 or 4:3). Digital Photo Viewer (JPEG) You can view Digital Photos on your TV. Repeat You can repeat a song or movie simply by pressing the REPEAT button. MP3/WMA This unit can play discs created from MP3/WMA files.
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Audio Video AUDIO-CD Audio Disc Markings Play Region Number PAL broadcast system in U.K, France, Germany, etc.
STANDBY/ON ( When STANDBY/ON is pressed on, the indicator goes out and the player is turned on. STANDBY Indicator When the unit is first plugged in, the indicator lights. DISC TRAY Place the disc here. OPEN/CLOSE ( Press to open and close the disc tray.
Page 7
- If P-SCAN Video Output is selected in Setup Menu, S-Video Outputs do not work. - The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver- sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
This button functions as a toggle switch. 13. EZ VIEW Button The aspect ratio of a picture can easily be adjusted according to the screen size of your TV (16:9 or 4:3). 14. DISC MENU Button Brings up the Disc menu.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player. - If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (COMPOSITE/S-Video ➝ I-SCAN ➝ P-SCAN ➝ SCART RGB) - When the Video Output in Setup menu is set to P-SCAN, S-Video Outputs do not work.
Page 10
Output mode. (See page 9) Note - If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15) - The number and position of terminals can vary depending on the TV set.
Page 11
Note - If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15) - The component terminal of TV can be marked by “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P depending on the manufacturer.
Page 12
Output mode. (See page 9) To see the progressive video output, - Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive You need a TV set supporting the progressive scan Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s input function.
Page 13
- Depending on your TV, certain HDMI output resolutions may not work. - Please refer to the user's manual of your TV. - If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10 seconds.
Page 14
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier. (See pages 27 to 28) - The position of terminals can vary depending on the Amplifier.
Page 15
- The position of terminals can vary depending on the Amplifier. Please refer to the user's manual of the Amplifier. - Please remove the dust cover before using the optical cable (not included) and put the cover on the cable again when it's not used.
1. Press the OPEN/CLOSE ( ) button. The STANDBY indicator light goes out and the tray opens. 2. Place a disc gently into the tray with the disc’s label facing 3. Press the PLAY/PAUSE ( ) button or OPEN/ CLOSE ) button to close the disc tray.
One more press makes it move to the beginning of the previous chapter. - When playing a CD in Menu Off mode, if you press the SKIP ( ) button, it moves to the next track. If you press...
Using the Disc and Title Menu Using the Disc Menu 1. During the playback of a DVD disc, press the MENU button on the remote control. 2. Press the / buttons to select Disc Menu, then press the or ENTER button.
(Depending on a type of disc, the black bars may not disappear completely.) - ZOOM FIT The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarge For 4:3 aspect ratio discs - Normal Wide Displays the content of the DVD title in 16:9 aspect ratio.
- 4:3 Pan Scan The left and right portions of the screen are cut off and the central portion of the 16:9 screen is displayed. - SCREEN FIT The top and bottom portions of the screen are cut off and a full screen appears.
- Depending on a disc, the Bookmark function may not work. Recalling a Marked Scene 1~3. The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 21. 4. Press the ¦/ buttons to select a marked scene.
- To select the Parent Folder Press the RETURN button to go to parent folder, or press the / buttons to select “..” and press ENTER to go to the parent folder. - To select the Peer Folder Press the ...
1. Open the disc tray. Place the disc on the tray. Close the tray. 2. Press the / or ¦ ¦ / buttons to select an avi file (DivX/XiviD) and then press ENTER button. Repeat playback Press the REPEAT button to change playback mode.
Page 24
0 2 _ d i v x 5 0 5 b - 8 has unsupported resolution. a 0 3 _ d i v x 5 0 2 s p - 8 a 0 4 _ d i v x 4 1 2 - 8...
Picture CD Playback 1. Select the desired folder. 2. Press the / buttons to select a Picture file in the clips menu and then press the ENTER button. 3. Press the INFO button on the remote control to select the menu you want to view and then press the ENTER button.
Using the Player Menu Language 1. With the unit in Stop mode, press the MENU button. 2. Press the / buttons to select Setup, then press the or ENTER button. 3. Press the / buttons to select Language Setup, then press the ...
Using the Audio Language 1. With the unit in Stop mode, press the MENU button. 2. Press the / buttons to select Setup, then press the or ENTER button. 3. Press the / buttons to select Language Setup, then press the ...
• If your TV system only has NTSC-Video input, you must choose “NTSC”. • If your TV system only has PAL input, you must choose “PAL ”. • If you set up the PAL TV, HDMI output frame rate is 50 Hz . Language Setup ...
Page 29
Setup ❺ Video Output Select Video Output. - S-Video : Select when you want to use Video and S- Video Out. - I-SCAN : Select when you want to use Component Interlace (525i) Out. - P-SCAN : Select when you want to use Component Progressive (525p) Out.
Setting Up the Rating Level 1. With the unit in Stop mode, press the MENU button. 2. Press the / buttons to select Setup, then press the or ENTER button. 3. Press the / buttons to select Parental Setup, then press the ...
Select On when you connecting the DVD 1080P7 with Samsung TV that support Anynet+. 1. With the unit in Stop mode, press the MENU button. 2. Press the / buttons to select Setup, then press the or ENTER button. Setup 3.
- Finalized, single session - Write speed low Upgrade procedure 1. Open the disc tray. Place the disc on the tray. Close the tray. The Firmware upgrade screen appears. 2. Press the ¦/ buttons to select Total, then press the ENTER button.
2. The DVD’s software doesn’t support the feature (e.g., angles). on screen. 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number or search time that is out of range. Disc Menu doesn’t appear. • Check if the disc has a Menu.
Output *S/N Ratio *Dynamic Range *Total Harmonic Distortion - Samsung Electronics Co., Ltd reserves the right to change the specifications with out notice. - Weight and dimensions are approximate. AC 110-240 V, 50/60 Hz 2.3 Kg 430mm (W) X 205mm (D) X 45mm (H) +5°C to +35°C...
Page 35
However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from: Samsung Electronics U.K.
Page 37
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.