Setting Up Anynet+(Hdmi-Cec) - Samsung DVD-1080PR User Manual

navigating the setup menu

Setting Up Anynet+(HDMI-CEC)

Anynet+ is a function that can be used to operate this DVD Player using a Samsung TV
remote control. This is done by connecting the DVD player to a SAMSUNG TV using an
HDMI Cable. (see pages 12-13) This is only available with SAMSUNG TVs that support
Anynet+.
To operate Anynet+, you must turn Anynet+(HDMI-CEC) On in the Setup Menu.
1
Press the MENU button.
2
Press the √/® buttons to
select HDMI Page, then
press the † or ENTER
button.
3
Press the π/† buttons
to select Anynet+(HDMI-
CEC), then press the ®
or ENTER button.
4
Set the Anynet+(HDMI-
CEC) to "On"on your DVD
Player., then press the ®
or ENTER button.
5
Set the Anynet+ function on
your Samsung TV. (See your
TV instruction manual for
more information.).
• When you press Anynet+
button on the TV remote
control, the OSD to the right
will appear.
56_ navigating the setup menu
-- HDMI Page --
HDMI Auto
Anynet+(HDMI-CEC) On
Picture Quality
BD Wise Off
-- HDMI Page --
HDMI Auto
Anynet+(HDMI-CEC) On
Picture Quality
BD Wise Off
-- HDMI Page --
HDMI Auto
Anynet+(HDMI-CEC) On On
Off
Picture Quality
BD Wise Off
DVP
View TV View TV
® ®
Select Device
®
®
Record
Menu on Device
®
Device Operation
®
Receiver : Off ®
Setup ®
Move
ENTER
Exit
TV Menu
To make the setup menu disappear, press the
MENU button.