Skil PWRCORE 12 DL529001 Owner's Manual page 12

b. To detach the battery pack:
Depress the battery-release button located on the front of the battery pack to release the
battery pack. Pull the battery pack out and remove it from the tool (Fig.2).
WARNING
be locked in center position when not in use or carrying at your side.
Direction-of-Rotation (Forward/Center-Lock/Reverse) Selector
WARNING
injury.
Your tool is equipped with a direction-of-rotation selector located above the trigger switch. This
selector is designed for changing the direction of rotation of the bit and for locking the trigger
in the "OFF" (center-lock) position (Fig.3).
a. Position the direction-of-rotation selector to the far left of the tool for forward rotation.
b. Position the direction-of-rotation selector to the far right of the tool for reverse rotation.
c. Position the switch in the "OFF" (center-lock) position to help reduce the possibility of
accidental starting when not in use.
NOTICE: To prevent gear damage, always allow the drill/driver to come to a complete stop
before changing the direction of rotation.
NOTICE: The drill/driver will not run unless the direction-of-rotation selector is engaged fully to
the left or right.
Fig. 3
Center-Lock
12
Battery tools are always in operating condition. Therefore, the Direc-
tion-of-Rotation (forward/center-lock/reverse) Selector should always
After tool use, lock the direction-of-rotation selector in the "OFF"
position (center-lock) to help prevent accidental starts and possible
Forward Reverse