Table of Contents
Advertisement
Establishing a browser connection to M-Link
xxxxxxxxx
M-Link device in an internal network
M-Link device in a public network
TSL encryption (Transport Layer Security)
Internet
Ethernet
If you have a QR reader, read the QR code in the label on the M-Link de-
vice.
Username = service The password is shown in the label at the end of the
M-Link device. The password can be changed on the "Update" tab. For further
information on browser use, see p. 15
If the device is in an internal network, you can establish a browser con-
nection to the device by reading the QR code or by entering the www
address in the label.
The address is in the format https:// and enter then the web address on the
label so that the "ouman.net" is replaced by text "ouman.local". For example,
https://m00000735-40rxr.ouman.local
If you do not know the www address of the M-Link device, you
can find the M-Link device in the LAN using the NetworkDis-
covery program. The program is available free of charge from
Ouman Oy.
If the device is in a public network, you can establish a browser connec-
tion to the device by reading the QR code or by entering the Access-IP
address. The address is shown in the label on the M-Link device.
M-LINK
PLEASE NOTE: Do not connect M-Link to the public Internet without
a firewall! If connected without a firewall, the M-Link device can be
exposed to network attacks. Normally a 3G modem, an ADSL/WDSL/
cable modem implements the firewall functionality, making a separate
additional device unnecessary. Change your own login password.
3
Browser use requires
logging in.
The password can be
changed.
Advertisement
Table of Contents
