Wiring Connections Table; Rs485 Communications Led; Rs232 Communications Led; Ce Compliance Notification - Honeywell Galaxy Printer Interface Installation Manual

There is a portable serial printer and power supply available from Ademco
Microtech, the part numbers are;
Portable serial printer ....... B019
Printer power supply ........ B020

RS485 Communications LED

In the event of an RS485 line failure an error message is printed out by the
printer (see Figure 3) and the RS485 communications LED starts to flash. The
LED flashes until communication with the Galaxy control panel has been
restored.

RS232 Communications LED

If the printer goes off-line the Printer Interface will communicate this to the
Galaxy control and start flashing the RS232 communications LED.

CE Compliance Notification

Note: As a result of the more stringent EMC test requirements of EN50130-4
it has been discovered that under extreme electrical conditions the
Printer Interface may, on occasion, cause the printer to spool or output
spurious characters.
The performance of the unit has in no way been degraded.
Apr 2004
A
B
+
-
Table 2: Wiring Connections
RS485 \ !! /
========!!========
/ !! \
Figure 3: RS485 Failure error message
IDC Connector
Yellow
Blue
Red
Black
II1-0145 rev 2