Control panel
1. Touch Screen
a. Set
i.
ii.
iii.
iv.
v.
vi.
vii.
b. Test
i.
ii.
iii.
iv.
v.
Secabo GmbH | Hochstatt 6-8 | 85283 Wolnzach | Germany | mail@secabo.com | www.secabo.com
Speed: D isplay speed parameters, (the data refers to the fastest cutting
straight line)
Force : Display force parameters.
XP : The scaling of the X direction(feeding direction),generally do not need to
change
YP : The scaling of the Y direction(Carriage direction),generally do not need
to change.
Fan Setting : Suction fan switch and settings,Prt Sensor Val: This is useless
for user.
LED : LED lights above the carriage, please keep it open when
working-Enable
VER: The version for firmware.
Force: D irectly adjust the pressure.
Sensor status: it will show red if the sensor has a cover and the opposite
shows black.
S1: T he position in front of the front bar,checking after the work, the paper is
remove the plotter or not.
S2: T he position in back of the pinch roller,control the feeding.
S3: T he position in paper tray,checking if there is any paper in the tray and
control the feeding.
5