Connecting To A Power Source - Samsung TL105 User Manual

Connecting to a Power Source

You should use the rechargeable battery BP70A supplied with the
camera. Be sure to charge the battery before using the camera.
BP70A rechargeable battery Specifi cation
Model BP70A
Type Lithium lon
Capacity 740mAh
Voltage 3.7V
Charging time Approximately 150 Minutes
Number of images and battery life: Using the BP70A
Battery life /
Number of images
Approx. 100 MIN /
Still image
Approx. 200 shots
Movie Approx. 80 MIN
These fi gures are measured under Samsung's standard conditions
and shooting conditions and may vary depending on the user's
methods.
12
Conditions
Using the fully charged battery,
Default settings, Program mode,
Shot to shot interval: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the fl ash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.
Using the fully charged battery
640x480 image size
30 fps frame rate
Important information about battery usage.
When camera is not in use, turn off the power.
Please remove the battery if the camera will not be used
for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.
Low temperatures (below 0°C) can affect the performance
of the battery and you may experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may
become warm. This is perfectly normal.
If you connect the AC adapter to the USB cable, you can use it
as an AC cable and recharge the spare battery with it.
- Using an AC cable
: Connect the AC adapter to the
USB cable. It can be used as a
power cable.
- Using a USB cable
: Remove the AC adapter.You can
download stored images to your
PC (p.97) or supply the power
to your camera through the USB
cable.