Flash / Left Button - Samsung TL105 User Manual

Flash ( ) / Left button
When the menu is displayed on the LCD
monitor, pressing the Left button makes
the cursor shift to the left tab.
When the menu is not displayed on the
LCD monitor, the Left button operates as
the Flash ( ) button.
Selecting the fl ash mode
1. Select the desired Recording mode, except for the [Movie]
mode. (p.21)
2. Press the Flash button until the desired fl ash mode indicator is
displayed on the LCD monitor.
3. A fl ash mode indicator will be displayed on the LCD monitor.
Use the correct fl ash to suit the environment.
Flash range
Normal
ISO
WIDE TELE
AUTO 0.8~3.5 0.8~2.0
[Selecting the Auto fl ash]
Macro Auto macro
WIDE TELE WIDE
0.2~0.8 0.4~0.8 0.2~3.5
If you press the shutter button after selecting the fl ash, the fi rst
fl ash fi res to check the shooting condition (Flash range and
Power ratio of fl ash). Do not move the camera until the second
fl ash fi res.
Using the fl ash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for
the fl ash is usually within 4 seconds. If the battery is weak, the
charging time will be longer.
The camera fl ash does not operate in the [Movie] and some
Scene modes.
Take photographs within the fl ash range.
The image quality is not guaranteed if the subject is too close
or highly refl ective.
When taking an image in poorly lit conditions with the fl ash,
there may be a white speck in the captured image. The speck
is caused by the fl ash light refl ecting off atmospheric dust.
(Unit: m)
TELE
0.4~2.0
33