Confirming The Completion Of The Installation; When Removing The Tv - Sony SU-WL500 Installation Manual

2
Install the TV onto the Base
Bracket.
 Referring to the Screw and Hook locations
diagram/table on page 20, determine the
holes of the Base Bracket for latching the
upper hooks of the Mounting Hook.
 Hold the TV securely with both hands, and
gently align it on the wall.
WARNING
• Be sure that two or more persons hold the TV when
carrying it.
• When carrying the TV, hold it in landscape
orientation, and take care not to drop it when
installing. Do not apply excessive force to the TV;
otherwise, it may be deformed.
Mounting Hook
8
(GB)
3
Base Bracket
Follow the instructions in the SU-WL500 instruction
manual to confirm.
Follow the instructions in the SU-WL500 instruction
manual to remove.
Firmly secure the TV and the
Base Bracket using the screw
supplied with SU-WL500
(+BVST4 × 12).
Note
When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
WARNING
Be sure to tighten the securing screw firmly.
If you fail to do so, the TV may fall when it is
pushed upward and cause injury.
Confirming the
completion of the
installation

When removing the TV

Screw
(+BVST4 × 12)