Sony SU-WL500 Installation Manual page 3

There are 4 types of installation. It may not be possible to install some types of TVs. Check the following and
install your TV in the adequate way.
AC adaptor holder kit SU-AH1 is not be able to installed.
A: Landscape, -20° leaning
To install the TV to the wall, the SU-WL500 Wall Mount Bracket is necessary. Screws and spacers listed below are
also necessary depending on the way of installation.
For further details/terms & conditions, contact the sales representative for professional use.
TV model
XBR-75X900E KD-75X9000E
XBR-65X900E KD-65X9000E
XBR-55X900E KD-55X9000E
XBR-49X900E KD-49X9000E
XBR-75X850E KD-75X8500E
KD-65X8500E
XBR-65X850E
KD-55X8500E
XBR-55X800E
KD-49X8000E
XBR-49X800E
XBR-43X800E KD-43X8000E
*1
You cannot install the TV other than the noted types.
For the TV with , the following are neccesary.
*2
Spacer: a washer with an outside diameter of 18 mm, inside diameter of 10 mm, and thickness of 2 mm
(SONY Part Number 7-688-000-32) × 20
Screw: PSW M6 × 25 mm (SONY Part Number 4-577-326-01) × 4 (1 pk)
*3
Make brightness setting to Standard or Custom 45 and lower.
*4
Make brightness setting of KD-55X8500E to Standard or Custom 30 and lower.
*5
Make brightness setting to Standard or Custom 35 and lower.
B: Landscape, +60° leaning
*1
Installation type
A
C
A
C
A
B
A
B
C
D
A
B
C
D
C
D
C: Portrait, no leaning
Wall-Mount Bracket
*2
Spacer
Model




*3


SU-WL500

*4

*4
*5
*5

*5

*5

*5

*5
D: Portrait, +20° leaning
Qty
1
3
(GB)
GB