Agc - Samsung SCC-B2015P User Manual

If you keep pressing the LEFT/RIGHT Setup switch, shutter speeds
toggles in the following order:
 OFF  AUTO X2  AUTO X4  AUTO X6  AUTO X8 
AUTO X12  AUTO X16  AUTO X24  AUTO X32  AUTO X48
 AUTO X64  AUTO X96  AUTO X128  AUTO X256  OFF
 1/100 (NTSC), 1/120 (PAL)  1/250  1/500  1/1000  1/2000
 1/4000  1/10K
Note
When the IRIS mode is ELC or WDR, you cannot use high speed
shutters.

AGC

❚
The AGC (Auto Gain Control) menu is used to set the AGC level
of the camera. When the AGC is active, the camera automatically
increases the sensitivity by amplifying the Video signal when the
strength of the signal falls below the normal value.
Only when OFF or a high speed shutter is selected in the
SHUTTER menu, you can set the AGC level.
You can select any of OFF, LOW, and HIGH.
Note
When the DAY/NIGHT is set to AUTO, the AGC is displayed with
--- so you cannot change its setting.
CAMERA ID
IRIS
SHUTTER
AGC
MOTION DET
DAY/NIGHT
WHITE BAL
PRIVACY
SPECIAL
RS-485
EXIT
OFF
ALC...
OFF
LOW
OFF
DAY...
ATW2
OFF
...
...
QUIT
23 23