Set Contrast; Set Minimum Light; System Menu; Stove Work Principles - Teba therm TP-12 Installation & Manuals

Pellet stove with central heating system
Hide thumbs Also See for TP-12:
Table of Contents

Advertisement

4.5.16.1 Set Contrast

This Menu allows to set the display contrast.
Push the buttons P4 and P6 to increase or decrease the contrast; P3 to save and exit, P1 to exit
without save.

4.5.16.2 Set Minimum Light

This Menu allows to set the display light when you don't push any button.

4.5.17 System Menu

THIS MENU IS FOR AUTORIZED PERSON.

5.0 Stove Work Principles

Only adults should use stoves. Children should not stay alone and close to stove. Stoves should only
be used according to this manual. Safety instructions described in section 2.1 should be followed.
5.1 Suitable Fuels
Pellet is a solid fuel which is obtained by compressing wood wastes at high pressure after drying,
grinding and making shavings and diameter of pellet 6-8 mm.
Wood pellet contains approximately 7-12% moisture. Its calorie higher than wood since its moisture
rate is low.
There are at least 3 steps while producing pellet. Firstly, wood wastes are made shavings by grinding,
after that they are dried with minimum moisture, later compressed, made cold and packaged. After
these process,, combustion and energy efficiency of trees increases 300% and so contribute
economy, environment and nature. It means that fuel amount decrease at rate 1/3, in addition lower
damage on forest and lower cost.
Advantages
It is a sustainable source. It contributes to economy and decreases imports of fossil fuel
It is acceptable for environment and health. After using ash is very low.
It is less dangerous than the other fossil fuels
It is used for producing electricity
It is under acceptable CO oscillation threshold values according to Kyoto Protokol
The cleanest of solid fuel is pellet
It is easily provided over the World
Transpotation of wood pellet is very easy
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents