Exposure Compensation; Movie Clip Frame Stabilizer - Samsung L830 User Manual

Exposure compensation

This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the Fn button.
Compensating Exposure
1. Press the Fn button, and then use the UP
and DOWN buttons to select the exposure
compensation icon ( ).
The exposure compensation menu bar will
appear as shown.
2. Use the LEFT and RIGHT buttons to set
the desired exposure compensation factor.
3. Press the Fn button again. The value you set will be saved and the
Exposure Compensation setup mode will close.
If you change the exposure value, the exposure indicator (
be displayed on the bottom of the LCD monitor.
A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor will appear white or you may not get
good pictures.
<< 46 >>
Movie Clip frame stabiliser
This function helps stabilize images captured during movie recording.
You can select this menu only in the MOVIE CLIP mode.
[Off] : Movie clip frame stabilizer function is
[On] : This function helps stabilize images
E V
-2 -1 0 +1 +2
) will
disabled.
captured during movie recording.
STABILIZER
Off